0.96 inch Blue OLED I2C Display (128×64)

Vibrant Blue Monochrome Display

Unlike the yellow-blue “split” OLEDs, this module features a full blue display area, providing a uniform and modern aesthetic for your projects. Every pixel is an individual light-emitting diode, allowing for a true black background and a viewing angle wider than 160 degrees. At RoboShop BD, we ensure these modules use the industry-standard SSD1306 driver, ensuring seamless compatibility with a vast range of open-source libraries.

Efficient and Easy to Integrate

This display is designed for “plug-and-play” simplicity. It operates on a wide voltage range (3.3V to 5V) and consumes as little as 0.06W during normal operation. The I2C communication protocol uses only two data pins (SDA and SCL), which is ideal for pin-constrained microcontrollers like the Arduino Nano or ESP8266. Its compact 27mm footprint allows it to fit into small 3D-printed enclosures or wearable gear easily.

Key Features

• Pure Blue Pixels: Consistent blue color across the entire 128×64 matrix.

  No Backlight Required: Self-illuminating pixels for maximum contrast and thinnes

• SSD1306 Controller: Widely supported by Adafruit GFX and U8g2 libraries.

• Wide Viewing Angle: Remains clearly visible even when viewed from the side (>160°).

• Low Power Usage: Ideal for battery-powered or solar-powered devices.

• I2C Interface: Only 4 pins total (VCC, GND, SCL, SDA) for a clutter-free build.

Technical Specifications