Rc Drone, Plane & boat parts
Showing 1–15 of 36 results
-
Drone
1245 12-Inch High-Quality Nylon Propeller Pair (CW + CCW)
The 1245 12-Inch Propeller Pair is a high-performance propulsion set designed for mid-to-large scale drones, available at RoboShop BD. These “12×4.5” propellers provide the substantial lift required for stable aerial photography and heavy-payload missions. Crafted from carbon-reinforced nylon, they offer superior rigidity compared to standard plastic props, ensuring they maintain their aerodynamic profile even under the high stress of a 1000g+ aircraft.
SKU: n/a -
Drone
30A Brushless ESC with BEC – XT60 & 3.5mm Bullet Connectors
The 30A Brushless Electronic Speed Controller (ESC) is a reliable, plug-and-play solution for powering brushless DC motors in quadcopters, fixed-wing aircraft, and DIY robotics. Pre-soldered with an XT60 battery connector and 3.5mm banana plugs, it eliminates the need for soldering, getting your project airworthy in minutes. Featuring a built-in 5V/2A BEC, it provides stable power to your flight controller and receiver directly from your 2S–3S LiPo battery.
SKU: n/a -
Drone
30A ESC Brushless Motor Speed Controller with BEC
The 30A Yellow Series Brushless ESC is a highly popular, budget-friendly electronic speed controller designed for multicopters and fixed-wing aircraft. Known for its reliability and simplicity, this ESC comes with a built-in 5V/2A BEC to power your flight controller and receiver directly from your flight battery. Whether you are building an F450 quadcopter or a DIY foamie plane, this ESC provides the consistent performance needed for stable flight.
SKU: n/a -
Drone
7040 High-Quality 3-Blade FPV Nylon Propellers (4PCS Set)
The 7040 3-Blade FPV Propeller Set is a premium propulsion solution available at RoboShop BD, specifically engineered for 7-inch long-range and cinematic drones. These “7x4x3” props strike the perfect balance between high thrust and smooth efficiency, allowing for stable cruising and aggressive punch-outs. Made from reinforced high-quality nylon, they are significantly more durable than standard PC props, resisting “prop wash” and surviving minor clips against vegetation.
SKU: n/a -
Drone
APM / Pixhawk Power Module with XT60 & 3A BEC
The APM / Pixhawk Power Module is an essential component for providing clean, regulated power to your flight controller, available at RoboShop BD. Equipped with an XT60 connector and a high-efficiency 5.3V 3A BEC, it not only powers your APM or Pixhawk but also provides real-time battery voltage and current consumption data. This allows your autopilot to estimate remaining flight time and trigger low-battery failsafes, ensuring the safety of your UAV missions.
SKU: n/a -
Drone
Betaflight F405 F4 V3S FPV Flight Controller with 50A 4-in-1 ESC Stack
Get your FPV drone in the air faster with this complete F405 V3S Flight Controller & 50A ESC Stack. This “Power Tower” combines a high-performance F4 flight controller with a massive 50A 4-in-1 BLHeli_S ESC, providing a plug-and-play solution that handles high-current spikes with ease. Designed with a standard 30.5mm mounting pattern, it is the perfect core for your 5″ Freestyle or Racing quadcopter.
SKU: n/a -
Drone
Carbon Fiber Landing Gear Set for S500 / S550 / X500 / X600 Drone Frame
The Carbon Fiber Landing Gear Set is a premium upgrade for mid-sized drone frames, available at RoboShop BD. Designed to fit S500, S550, X500, and X600 models, this tripod provides much-needed ground clearance for underslung camera gimbals and batteries. Constructed from 3K carbon fiber tubes and reinforced nylon joints, it offers an exceptional strength-to-weight ratio, ensuring your drone remains lightweight while providing a stable, vibration-resistant platform for takeoffs and landings.
SKU: n/a -
Drone
DJI F330 Quadcopter Drone Frame
The DJI F330 FlameWheel is a compact, high-performance quadcopter frame available at RoboShop BD. Designed for pilots who want the legendary durability of the FlameWheel series in a smaller, more agile package, the F330 features a 330mm wheelbase. It is perfect for aerobatic flight, indoor testing, or small-scale FPV setups where space is limited but structural integrity cannot be compromised.
SKU: n/a -
Drone
DJI F450 Quadcopter Drone Frame
The DJI F450 is the gold standard for entry-level drone builds, available at RoboShop BD. Known for its extreme durability and simple design, the F450 is a 450mm wheelbase quadcopter frame that serves as the perfect starting point for hobbyists, students, and researchers. Whether you’re building your first DIY drone or a testbed for custom flight algorithms, this frame offers a balance of lightweight agility and enough structural strength to survive the inevitable “learning landings.”
SKU: n/a -
Drone
DJI F550 Hexacopter Drone Frame
The DJI F550 FlameWheel is a legendary hexacopter frame designed for pilots who prioritize stability, redundancy, and ease of assembly, available at RoboShop BD. With its 550mm wheelbase and six-motor configuration, the F550 provides significantly more lifting power and flight smoothness than standard quadcopters. Built using advanced engineering materials, it serves as a robust foundation for everything from hobbyist FPV flying to professional aerial videography and research projects.
SKU: n/a -
Drone
F450 / F550 High-Strength Plastic Landing Gear Set
The Plastic Landing Gear Set is a lightweight and essential accessory for DJI-style F450 quadcopters and F550 hexacopters, available at RoboShop BD. Designed to bolt directly onto the FlameWheel arms, these skids provide approximately 150mm of ground clearance. This height is critical for protecting your motors, ESCs, and center-plate electronics from dust, moisture, and uneven terrain during takeoffs and landings.
SKU: n/a -
-
Drone
Gemini said 3DR Radio Telemetry Module Kit (433MHz 500mW) – Long-Range Data Link for APM, Pixhawk & PX4 at RoboShop BD
-8%
DroneGemini said 3DR Radio Telemetry Module Kit (433MHz 500mW) – Long-Range Data Link for APM, Pixhawk & PX4 at RoboShop BD
The 3DR Radio Telemetry Kit is a professional-grade wireless data link available at RoboShop BD. This high-power 500mW version operates on the 433MHz frequency, providing an incredible long-range connection between your aircraft and ground station. It allows for real-time monitoring of flight data, GPS position, and battery status on your laptop or tablet. Compatible with APM, Pixhawk, and PX4 flight controllers, it is the ultimate tool for autonomous missions and long-distance FPV flights.
SKU: n/a -
Drone, GPS Modules
GPS Folding Stand for Drone
The GPS Folding Stand is an essential accessory for any drone pilot looking to maximize navigation accuracy, available at RoboShop BD. This mount allows you to position your GPS and compass modules high above the drone’s frame, effectively isolating them from electromagnetic interference caused by motors and ESCs. With its quick-fold design, it ensures your drone remains portable and easy to transport without needing to disassemble your delicate electronics.
SKU: n/a
