A compact, all-in-one smart balance charger that supports virtually all popular battery types. The IMAX B6 offers precise charging, automatic cell balancing, real-time LCD monitoring, and built-in safety protections—making it a reliable choice for RC, robotics, and DIY battery management.
Shop
Showing 151–165 of 273 results
-
Modules and Shields
ILI9341 3.2 Inch 320×240 TFT LCD Display Touch Screen Module 16BIT
Upgrade your electronics projects with the 3.2″ ILI9341 TFT LCD Touch Screen Module. Featuring a sharp 320×240 resolution, a responsive resistive touch panel, and a lightning-fast 16-bit parallel interface for smooth graphics. Perfect for advanced microcontrollers like Arduino Mega and STM32. Includes an onboard MicroSD slot for easy media storage.
SKU: n/a -
Chargers, Power & Battery
IMAX B3 Compact LiPo Battery Balance Charger | 2S–3S 7.4V–11.1V Li-Po Charger for RC Drones & DIY Projects
-22%
Chargers, Power & BatteryIMAX B3 Compact LiPo Battery Balance Charger | 2S–3S 7.4V–11.1V Li-Po Charger for RC Drones & DIY Projects
The IMAX B3 LiPo Balance Charger is a reliable and easy-to-use compact charger designed for 2S and 3S lithium polymer (Li-Po) batteries. Ideal for RC drones, airplanes, cars, and DIY robotics, it ensures balanced cell charging, enhanced safety, and long battery life with built-in overcharge protection.
SKU: n/a -
Sensors
IR Obstacle Avoidance Sensor Module
The IR Obstacle Avoidance Sensor is a versatile and low-cost proximity module available at RoboShop BD. It uses a pair of infrared emitting and receiving tubes to detect objects in its path. When the infrared light hits an obstacle, it reflects back to the receiver, triggering a digital output signal. With its adjustable sensitivity and compact design, it is the primary choice for line-following robots, DIY security systems, and industrial object counters.
SKU: n/a -
Transmitter and Receiver
JR ProPo Adjustable RC Transmitter Neck Belt – Universal Safety Lanyard
-15%
Transmitter and ReceiverJR ProPo Adjustable RC Transmitter Neck Belt – Universal Safety Lanyard
JR ProPo Adjustable RC Transmitter Neck Belt
Fly for hours without fatigue using the JR ProPo Adjustable Neck Strap. This durable, 25mm wide lanyard takes the weight of the transmitter off your hands, allowing for precise control and protecting your radio from accidental drops. Features a secure metal spring clip and fully adjustable length to fit any pilot comfortably.
Quick Specs:
-
Width: 25mm Comfort Strap
-
Clip: Heavy-Duty Metal Hook
-
Fit: Adjustable Length
-
Compatibility: Universal (JR, Futaba, FlySky, RadioMaster, FrSky, etc.)
SKU: n/a -
-
Drone
KK V5.5 Multirotor Drone Flight Controller Board – Simple & Robust Stability System at RoboShop BD
-11%
DroneKK V5.5 Multirotor Drone Flight Controller Board – Simple & Robust Stability System at RoboShop BD
The KK V5.5 Flight Controller is an iconic, entry-level stabilization board available at RoboShop BD. Known for its extreme simplicity and durability, this board uses three dedicated onboard gyros to stabilize multirotor aircraft with up to 6 rotors. Unlike complex modern controllers, the KK V5.5 requires no computer for basic tuning—simply use the onboard potentiometers to adjust gain. It is the perfect starting point for students and hobbyists building their first quadcopter, tricopter, or hexacopter.
SKU: n/a -
Rc Drone, Plane & boat parts
KK2.1.5 Flight Controller Board with LCD | Multi-Rotor Drone Stabilization System with MPU6050 & Atmel 644PA
-14%
Rc Drone, Plane & boat partsKK2.1.5 Flight Controller Board with LCD | Multi-Rotor Drone Stabilization System with MPU6050 & Atmel 644PA
-
Multi-rotor flight controller with LCD display
-
Built-in 6050 MPU sensor for stabilization
-
Atmel 644PA processor for precise control
-
Supports quadcopters, hexacopters, and octocopters
-
Easy setup via onboard LCD interface
SKU: n/a -
-
Drone
Landing Gear Set for F330 Drone Frame
The F330 Landing Gear Set is a dedicated protective accessory for the F330 FlameWheel frame, available at RoboShop BD. These “tall” landing skids provide the necessary ground clearance to protect your motors, electronic speed controllers (ESCs), and small underslung batteries during takeoff and landing. Crafted from high-impact nylon, they are designed to be lightweight enough to maintain the F330’s agility while being tough enough to withstand rough landings on uneven terrain.
SKU: n/a -
Drone
Landing Gear with Gimbal & Battery Rack for F450 / F550
The Tall Landing Gear with Gimbal & Battery Rack is an essential upgrade for F450 quadcopters and F550 hexacopters, available at RoboShop BD. This multi-functional kit provides approximately 190mm–200mm of ground clearance, creating the necessary space to mount professional camera gimbals and large battery packs underneath the frame. Constructed from high-strength ABS plastic and reinforced glass fiber tubes, it significantly enhances the stability and payload capabilities of your DIY drone.
SKU: n/a -
Microcontroller Units
LILYGO TTGO ESP32-S3 T-Display S3 with shell WIFI Development Board Microcontroller
-7%
Microcontroller UnitsLILYGO TTGO ESP32-S3 T-Display S3 with shell WIFI Development Board Microcontroller
- LILYGO TTGO ESP32-S3 development board with protective shell
- 1.9″ color LCD display (170×320) for visual projects
- Dual-core ESP32-S3 MCU with 16MB Flash & 8MB PSRAM
- Wi-Fi + Bluetooth 5.0 for wireless IoT applications
- 4 Day General Warranty
- Fast Home Delivery all over Bangladesh
- Battery voltage detection on IO04
- Lightweight, compact design ideal for embedded solutions
- Perfect for Bangladesh IoT, DIY, and automation enthusiasts
SKU: n/a
